Inspection And Testing Of Electrical Installations – Why Inspect And Test? – Section Design, Installation, Inspection And Testing – Section Extensions, Material Alterations And Material – Changes Of Use – Section Information About Other Legislation – Compliance With Building Regulations Part P – Earthing And Bonding To Comply With Part P – Registered Domestic Installer – Unregistered Competent Person – Diy Installer – Summary – Types Of Certification Required For Inspecting And Testing – Of Installations – Certification Required For Domestic Installations (Part P) – Minor Electrical Installation Works Certificate – Part P, Domestic Electrical Installation Certificate – Periodic Inspection, Testing And Reporting – Certification Required For The Inspecting And Testing Of – Installations Other Than Domestic – Minor Electrical Installation Works Certificate – Electrical Installation Certificate – Initial Verification Inspection – Initial Verification Testing – Periodic Inspection Report – Periodic Inspection – Three Phase Circuit/Systems – Periodic Testing – Voltage Drop In Conductors – Testing Of Electrical Installations – Safe Isolation – Isolation Procedure – Testing For Continuity Of Protective Conductors – Main Equipotential Bonding – Continuity Of Supplementary Bonding – Continuity Of Circuit Protective Conductors – Method One – Method Two – Ring Final Circuit Test – Complete Ring Circuit – Broken Ring Circuit .
